CHARACTERIZATION OF INORGANIC PARTICLES IN SELECTED RESERVOIRS AND TRIBUTARIES OF THE NEW YORK CITY WATER SUPPLY1

ABSTRACT: Individual particle analysis (IPA) by scanning electron microscopy interfaced with automated image and X‐ray analyses was used to characterize inorganic particles in five reservoirs and four tributaries located within the Catskill and Delaware systems of the New York City water supply. Individual particle analysis provides combined elemental and morphologic characterizations. Results are presented in terms of particle projected area per unit volume (PAV), consistent with optical impacts, and partitioned into seven generic particle types according to composition. Minerals of terrigenous origins, particularly clay minerals, dominated the inorganic particle populations of all the study systems except one downstream reservoir. Higher PAV levels were observed in the Catskill system. Particle dynamics represented by PAV were driven primarily by runoff, while the reservoirs were also greatly influenced by the timing of sediment resuspension promoted by drawdown of the surface and fall mixing. The benefit of the serial configuration of the reservoirs in decreasing inorganic particles with progression downstream towards the city is demonstrated. The patterns in PAV levels among the study systems generally tracked those of more common metrics of impacts of suspensoids, including mass concentrations of suspended solids, turbidity, and Secchi disc transparency.     

极性基湿润剂与矿岩类粉尘颗粒的作用机理

根据矿岩类粉尘微颗粒的表面性质和极性基湿润剂的特性，应用分子热力学和表面物理化学理论探讨了湿润型抑尘剂与矿岩类粉尘之间的相互作用机理。矿岩类粉尘吸附水的本质是由于它们之间的相互吸引作用，是分子之间的短程相互作用力和长程作用力共同作用的结果。当矿岩类粉尘与水相碰撞时，只有当吸引力大于排斥力时，水分子才能牯附于矿岩类粉尘，表面张力和体系自由能足够小时，水才能湿润矿岩类粉尘。分析了湿润剂对水和矿岩类粉尘的表面改性的原理，它增加水和矿岩类粉尘之间的相互作用力，减小了界面表面张力和体系自由能，使矿岩粉尘被水湿润能自由地进行。     

哈尔滨冬季大气污染及逆温对污染物扩散影响

利用实际监测资料研究分析了哈尔滨市2000-2003年大气污染物的变化状况,和冬季重度污染发生的气候条件,特别指出了逆温持续性、强度、和层厚对大气污染扩散影响的正比关系,即逆温日数越多,超标污染日越多,逆温强度越大,污染越重的规律.     

大气环境影响评价工作分级要求要点

根据大气环境影响评价工作的分级要求,提出了针对性的工作要点,以满足大气环境评价工作的需要.     

ACCURACY OF LAKE AND STREAM TEMPERATURES ESTIMATED FROM THERMAL INFRARED IMAGES1

Emitted thermal infrared radiation (TIR, λ= 8 to 14 μm) can be used to measure surface water temperatures (top approximately 100 μm). This study evaluates the accuracy of stream (50 to 500 m wide) and lake (300 to 5,000 m wide) radiant temperatures (15 to 22°C) derived from airborne (MASTER, 5 to 15 m) and satellite (ASTER 90 m, Landsat ETM+ 60 m) TIR images. Applied atmospheric compensations changed water temperatures by ?0.2 to +2.0°C. Atmospheric compensation depended primarily on atmospheric water vapor and temperature, sensor viewing geometry, and water temperature. Agreement between multiple TIR bands (MASTER ‐ 10 bands, ASTER ‐ 5 bands) provided an independent check on recovered temperatures. Compensations improved agreement between image and in situ surface temperatures (from 2.0 to 1.1°C average deviation); however, compensations did not improve agreement between river image temperatures and loggers installed at the stream bed (from 0.6 to 1.6°C average deviation). Analysis of field temperatures suggests that vertical thermal stratification may have caused a systematic difference between instream gage temperatures and corrected image temperatures. As a result, agreement between image temperatures and instream temperatures did not imply that accurate TIR temperatures were recovered. Based on these analyses, practical accuracies for corrected TIR lake and stream surface temperatures are around 1°C.     

大气颗粒物手工比对监测体系滤膜称量质控技术探讨

健全大气颗粒物手工比对监测体系是"十三五"环境空气自动监测质量管理的一项重点任务,其中颗粒物滤膜的称量直接影响手工监测数据质量。研究调研了国内各级环保部门所属环境监测机构颗粒物滤膜称量工作情况,结合国内外方法标准、技术规范等,重点探讨了称量实验室环境、称量设备、称量影响因素等滤膜称量质控要点,并针对环境管理与监测需求对大气颗粒物手工比对监测滤膜称量质控提出建议。     

广州白云国际机场飞机大气污染物排放分析

根据收集到的2008-2012年广州白云国际机场航班起降次数，参考《珠江三角洲非道路移动源排放清单开发》飞机污染物估算方法及排放因子，计算出此期间机场飞机大气污染物排放量，并与2010-2012年广州市机动车污染物排放情况对比。结果表明：飞机大气污染物排放量随客运量的增长呈逐年上升趋势，而与机动车排放相比，飞机大气污染物排放量较小，故现阶段仍应以机动车作为移动源污染控制的重点。     

广州夏季办公室内细颗粒中多环芳烃污染特征研究

大部分的都市办公人群每天在办公室至少度过8 h。而室外环境的渗透、办公室内吸烟、办公设备使用和中央通风系统均可能导致细颗粒物及多环芳烃(PAHs)在室内积聚而造成微环境污染。2015年5—6月,在广州市3种不同功能区(商住区、高新产业区、工业区)共选取了14间不同类型的办公室,对其室内外PM_(2.5)和多环芳烃进行同步监测。结果表明,(1)14间中有12间办公室内的PM_(2.5)浓度水平高于世界卫生组织(WHO)的推荐值25μg·m-3;(2)与国内外类似研究相比,办公室内外∑16PAHs及Ba P-eq的监测浓度水平均较低,并呈现一致规律:文印>室外>吸烟>多人>单人>无窗(无人),其中Ba P-eq低于欧盟规定的安全限值1 ng·m-3;(3)文印工作和吸烟行为与室内PM_(2.5)和PAHs浓度升高有密切关系,分别对5环和4环PAHs贡献明显;(4)其他无明显内源的办公室的细颗粒中PAHs污染在监测期间主要来源于室外贡献。     

上海青浦地区大气降水的化学特征

利用上海青浦地区2003—2014年观测的大气降水监测资料,分析该区域12 a以来大气降水的酸化程度、化学组成特征,探讨降水中化学成分的不同来源及相对贡献。结果表明:降水pH年均值为4.43~6.33,酸雨频率为2.6%~86.8%,降水酸化程度大致经历了明显恶化和波动变化2个阶段。降水电导率年均值为1.77~4.01 m S/m,呈下降趋势。降水中各离子雨量加权平均当量浓度顺序为SO_4~(2-)NH_4~+Ca~(2+)NO_3~-Cl~-Na~+Mg~(2+)F-K~+,SO_4~(2-)、NH+4、Ca~(2+)和NO_3~-是降水中的主要离子,占离子总量的83.0%;降水类型由硫酸型向硫酸和硝酸混合型转变。降水离子中的二次组分SO_4~(2-)、NO_3~-和NH_4~+绝大部分来源于人为源,Ca~(2+)、Mg~(2+)和K+主要来自于土壤源和人为源的贡献,Cl~-主要来自海洋源,同时人为源的影响也不可忽视。     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.